10 common mistakes in gypsum board installation and how to prevent them

اخبار مرتبط

تعداد بازدید: 6
زبان : فارسی

10 common mistakes in gypsum board installation and how to prevent them

10 common mistakes in gypsum board installation and how to prevent them

تاریخ درج خبر : 1404/5/28
منبع : banasun

Gypsum board is considered one of the main materials in dry construction, which is widely used today in modern projects, building renovations, interior design, and the construction of ceilings and walls. However, the correct installation of gypsum board is as important as choosing the right one. In case of improper installation, not only will the proper performance not be achieved, but there may also be risks such as cracking, moisture absorption, reduced safety, and even premature structural failure. In this article, we will discuss 10 common mistakes in gypsum board installation and methods to prevent them, so that engineers, installers, and end-users can avoid potential problems and achieve the best results.

  1. Failure to use standard and appropriate profiles

One of the most important pillars of correct gypsum board installation is the use of standard and high-quality profiles such as Banasahan's F47, U36, C, U, and L. Using low-quality or non-standard profiles leads to a decrease in installation quality, reduced strength, and long-term risks.

Solution: Always use profiles produced by reputable companies like Banasahan. These products are manufactured in compliance with dry construction standards and have a perfect match with gypsum panels.

  1. Incorrect installation of horizontal and vertical structures

Incorrect arrangement of horizontal and vertical structures leads to an uneven surface, reduced strength, and misalignment in gypsum board installation.

Solution: Follow the installation instructions for F47 and U36 metal structures precisely and ensure they are plumb.

  1. Failure to maintain the proper distance between structures

If the distance between structures is too large, the likelihood of sagging and cracking in the gypsum board increases. On the other hand, a short distance will increase costs.

Solution: Maintain the standard distance between structures according to the execution plan and the Banasahan manual.
۱۰ اشتباه رایج در نصب و اجرای گچبرگ

  1. Incorrect selection of gypsum board type

Using standard RG gypsum board in places exposed to moisture or heat can be damaging and lead to rapid panel failure.

Solution: In humid places like bathrooms, use MR panels; in places requiring heat resistance, use FR panels; and in places where simultaneous fire and moisture resistance is needed, use Banasahan's FM gypsum board.

  1. Improper connection of panels to the structure

If gypsum boards are not placed correctly and with proper connectors on the structure, cracking or sagging will occur in the future.

Solution: Use Banasahan connection fasteners such as clips, brackets, and longitudinal connectors, and install them according to the instructions.

  1. Incomplete joint sealing and puttying

Improper joint sealing between gypsum boards can lead to cracking, surface undulation, or even moisture penetration.

Solution: Use special putty for gypsum board to fill the joints and, after it has completely dried, proceed with sanding.

  1. Failure to observe expansion joints for material expansion and contraction

In projects with a large area or variable temperature, the failure to install expansion joints can cause the gypsum boards to expand and crack.

Solution: Use expansion joints at specified intervals to allow the materials the necessary space for thermal movement.

  1. Use of improper screws or non-standard spacing

Improper screws can damage the gypsum layer and, over time, separate the gypsum board from the structure.

Solution: Use special screws for gypsum board installation and maintain the standard spacing between screws.

  1. Installing gypsum board on unstable structures

If the underlying structures lack the necessary strength, installing gypsum board on them is completely ineffective and dangerous.

Solution: Before installing the gypsum board, ensure the underlying structure's strength and stability.

  1. Disregarding safety principles against earthquakes

In areas with the risk of earthquakes, improper installation can lead to the separation of parts, the collapse of false ceilings, and injury to people.

Solution: Use high-quality, resistant systems and profiles like Banasahan products.

Summary

Correct gypsum board installation guarantees the quality and durability of modern dry structures. Panel Sanat Fars Company (Banasahan), by producing gypsum panels and profiles that meet current standards, as well as providing precise and specialized connection fasteners, enables installers to carry out their projects with peace of mind and confidence in the quality. If you need technical consultation or want to contact Banasahan's experts, please visit our contact page at the following address:

🔗 Contact Us

   نظرات
دیدگاه های ارسال شده توسط شما، پس از تایید مدیر سایت در وب سایت منتشر خواهد شد.
پیام هایی که حاوی تهمت یا افترا باشد منتشر نخواهد شد.
پیام هایی که به غیر از زبان فارسی یا غیر مرتبط با خبر باشد منتشر نخواهد شد.